Tuxhorn 951.15.00.00, Руководство по сборке и эксплуатации

Страница: 29 / 48

950.15.02.00
Dated 2021/09/10
- 13 -
GB
6.3 Initial commissioning
Please observe the corresponding instructions for the control unit.
Danger!
The system must be filled with water and ventilate before initial electrical
start-up.
Task Procedure OK
Preparation and
inspection

Visual inspection of the installation.

Are all of the sensors installed and connected at the
correct locations?

Are all outputs connected?



Switch on the control
unit Supply power to the control unit

Set up the control
unit Please observe the instructions for the control unit.

Select a target temperature

Select the maximum accumulator temperature

Start the initial start-up routine
___
_
___
__
7 O p e r a t i o n
7.1 Control unit
Observe the installation and operating instructions for the control unit used.
7.2 Gravity brake
A gravity brake is integrated above the pump in the return line to prevent incorrect circulation.
7.3 Settings
Adjust the target temperature and maximum accumulator temperature.
Observe the installation and operating instructions for the control unit used.