Page 69
8.
Printer
8.1
Printer Output
The printing is on thermal paper with 24 characters per line and
contains the following information:
•
Date:
•
Time:
•
Ser. Num:
•
Model:
•
Version:
•
Cycle Num:
•
Cycle:
•
Dry Time:
•
Ster Temp:
•
Ster Time:
When the sterilization cycle begins the printer starts printing the above
data.
After the preliminary printing, the autoclave starts performing the
sequence of operations of the cycle. The measured values of
temperature and pressure are printed at fixed time intervals, according
to the phase of the process, as shown in the table on the next page.
The data is printed from the bottom up, beginning with the date and
ending with "Cycle Ended". For an aborted cycle, "Cycle Failed" and
the Error message are printed (refer to "Displayed Error
Messages/Symbols").
For an example of a typical printout, see next page.
Printer output
Description
Operator
:
____________
To be filled in manually by operator
Time:
12:14:47
Time sterilization cycle ended
Cycle Ended
00:24:43
101.3
099.7
Cycle finished time
E 00:23:43
107.0
107.4
The time, temperature, and pressure during
Содержание LabSci 11-V
