Tuthill KINNEY SDV SDV-120 Скачать руководство пользователя страница 14

Страница: 14 / 44

MONTHLY

1. Check the oil color: If the oil color is too dark, replace the oil.

2. Check oil level: If the oil level drops in a short period of time, check the integrity of mechanical seals.

3. Check grease.

QUARTERLY

1. Check the cooling liquid flow and discharge cooling liquid color. May require periodic cleaning of the cooling jackets and

water piping.

2. Replace oil at ND (Drive End) casing.

3. Replace grease at NDE (Non Drive End).

EVERY 6 MONTHS

1. Check all process and utility piping and their supports.

YEARLY

1. Check the pump internal surfaces, casing and screws surfaces for any sign of rust and flaws.

2. Check all mechanical seals and lip seals

DRY VACUUM PUMP MAINTENANCE & INSPECTION SCHEDULE

ITEM

CHECK POINT

DAILY

MONTHLY

QUARTERLY

6 MOS.

YEARLY

Motor Amperage

Any Change? Amperage as specified?

Rotation

Is the rotation smooth and direction correct?

Suction & Discharge Pressure

Is the pressure as specified?

Noise & Vibration

Any abnormal sound or vibration?

Temperatures

Any excessive oil or water temperature?

Cooling Liquid Leak

Check for leakage of the cooling liquid.

Oil Level Gauge

Is oil at proper level?

Water contamination on free

end cover

What is the color? Has it changed to reddish

brown?

Cooling Water Pressure

Is the pressure as specified or too high?

Grease

Is grease color dark, contaminated or broken

down?

Oil Leaks

Any signs of oil leaks?

Reverse Cooling Filter (Cooler)

Any heat on suction pipe?

Belt Tension

Check V-Belt Tension

Lubricant Color

Check color; if dark, replace lubricant

Oil Level

If oil level drops drastically check mechanical

seal.

Oil/Grease change

Suction & Discharge Piping

Is there any accumulated scale or dirt?

Process and Utility piping and

supports

Pump casing internal and

screws surfaces

Any signs of rust and flaw found?

Mech. Seal, Oil Seal, Bearing,

O-Ring, V-Belt & Packing

Inspect for damage & replace as needed.

Timing Gears

Inspect for damage

Содержание KINNEY SDV SDV-120













































Результаты поиска

Содержание KINNEY SDV SDV-120

Отзывы:

Tuthill KINNEY SDV SDV-120, Инструкция по установке, эксплуатации, обслуживанию и ремонту, Страница: 14 / 44

Результаты поиска

Содержание KINNEY SDV SDV-120

Отзывы: