Tusa IMPREX II IQ-400, Инструкция по эксплуатации

Страница: 14 / 47

3.1 Use of Water Contacts
As described in Section 2.1, “Water Contacts”, the IQ-
400 is controlled with the MODE/PLAN,PLAN, and
MODE contacts (Fig 3.1), as follows:
Activation:
Touch the PLAN and MODE/ PLAN
contacts.
Dive Planning:
Once the IQ-400 has been activated, touch the
PLAN and MODE/ PLAN contacts.
Clock:
Once the IQ-400 has been activated, touch the
MODE and MODE/ PLAN contacts for two
seconds. The time is then displayed for four seconds.
When the MODE and MODE/ PLAN con-
tacts are touched for over three seconds, the display
will start to scroll through the following modes. Lift
your fingers when the desired mode is displayed:
Logbook Memory:
At LOG the logbook memory is accessed.
Dive History Memory:
At HIS the history memory is accessed.
Personal/ Altitude Adjustment Setting:
At Alt the personal and/or altitude adjustment can
be set.
Time Setting:
at Set the time and date can be adjusted.
Return:
you can at any time exit the above modes by touching all three contacts at the
same time. First make contact between the
PLAN and MODE contacts, e.g.
by covering both contacts with your right thumb. Without lifting your right
thumb, touch the
MODE/ PLAN contact with your left thumb. Alternatively,
you can exit the modes simply by submerging the IQ-400 in water.
You may sometimes encounter problems in using the contacts, or the IQ-400
may activate on its own. The reason for this is probably contamination or
12
A m
S
C
S
P
E
E
D
HIS LOG ALT SET PLAN
MODE MODE
PLAN PLAN
MODE MODE
PLAN PLAN
a)
b)
c)
A m
S
C
S
P
E
E
D
HIS LOG ALT SET PLAN
MODE MODE
PLAN PLAN
MODE MODE
PLAN PLAN
A m
S
C
S
P
E
E
D
HIS LOG ALT SET PLAN
MODE MODE
PLAN PLAN
MODE MODE
PLAN PLAN
Figure 3.1 Using the
Water Contacts
a) Activation and
dive planning
b)Time display and
menu based modes
c) Exit the modes