background image

 

For more products, accessories, and our support

knowledge base, visit www.turtlebeach.com

Operating Instructions 

Connecting TV / Music Players

Connecting to 

Headphone Jacks

W

3

Wireless Wii Headphones

®

TM

The W3 may be used for listening to 
other audio sources, such as the output 
of your TV, the output of your PC sound 
card, an MP3 player, home theater 
system, etc. In each case, simply connect 
the output of the audio device to the 
audio input jack on the base unit and set 
the level control for optimum listening 
volume.

Use an optional 3.5mm to dual RCA 
stereo splitter cable to connect your 
wireless W3 headphones to standard 
3.5mm headphone jacks, such as an 
Ipod®, MP3 player, TV output, etc.

Connecting the Wii

Connect the transmitter, Wii and TV 
or sound system as shown below. 
This will allow you to hear the Wii with 
either your sound system or W3 
headphones.

Wii

Transmitter

Important:

 Do not put transmitter unit close 

to the Wii sensor bar.

TV or Sound System

Package Contents

• W3 wireless headphones 
• Transmitter base unit
• DC power adapter
• 1 AAA battery
• This User's Guide

For warranty information please visit
http://support.turtlebeach.com

Copyright © 2010 Voyetra Turtle Beach, Inc. (VTB, Inc.) All rights 
reserved. No part of this document may be reproduced without 
permission. The Turtle Beach Logo, Ear Force and Turtle Beach are 
registered trademarks of VTB, Inc. Nintendo is a registered trademark 
and Wii is a trademark of Nintendo. All other trademarks are 
properties of their respective companies and are hereby 
acknowledged. Product features, visual design, prices, package 
contents and specifications are subject to change without notice.    
Part# TBS-2090  V1

The W3 headphones are powered by 

1 AAA battery (included) located in the 

left ear cup. Lift the battery cover and 
insert the battery before operating the 
headphones. Then turn the power switch 
on the right ear cup to the "on" position.

Installing the Battery

Connecting the Power Adapter

The W3 base unit is powered by a DC power 

adapter, (included). Insert the power adapter 

into the power jack on the back of the 
base unit. 

When the adapter is inserted into the base 
unit and plugged into a wall socket, a red 
light on the front of the base unit will light 
up to indicate that power is active.

CAUTION: Use only the supplied power adapter. 
Failure to use the correct adapter can result in fire, 
damage to the unit or other hazards.

Отзывы: