Turnstiles Traffic H1, Руководство по эксплуатации

Страница: 32 / 101

Design and function
32 5816,0013US / Version 02
5 Design and function
5.1 Design
1
2
3
Mag00546
Fig. 7: Barrier system design series "Traffic"
1 Barrier housing
2 Anchor support (accessory), required from 11.5 ft (3.5 m) onwards
3 Barrier arm
5.2 Function
The barrier consists of a barrier housing with drive system and a
barrier arm.
The drive system consists of an electric motor, control unit, and the
lever system. The lever system locks the barrier arm in both end
positions. In case of power outage, the barrier arm can easily be
moved by hand.
Sensors integrated in the motor supply exact data on every correct
position of the barrier arm and thus serve the control unit to control
the best acceleration and deceleration.
Safety facilities like induction loops or safety scanners must be
installed on site in all cases. The safety installations must ensure
that the barrier closes only after the vehicle has passed through.
Safety installations, such as induction loops can be purchased
from MAGNETIC.
Traffic H1 Swing Gate Horizontal Barrier
www.TURNSTILES.us | patrick.mcallister@TURNSTILES.us | 303-670-1099