73
mWing
Electrical connection
8.3.1
Wire and cable cross-sections, stripping lines and cores
IMPORTANT!
The core cross-section of the mains cables to the master and the mains
connection cables between master and slave must be between
.002"
and .006" sq inch (1
.5 and 4 mm²
).
Observe national regulations
regarding cable length and corresponding wire cross-section.
Strip the mains cables, the mains connection cables and wires as per the
following figure.
0.8
0.31
1.2
0.31
2
3
1
Mag0081
0
Fig. 40: Stripping (dimensions in
inches
)
1 Phase
2 Zero conductor
3 Protective earth conductor
www.TURNSTILES.us | [email protected] | 303-670-1099
