14
mWing
Safety
2.5
Symbols on the device
Warning of electric voltage!
The warning sign indicates dangerous areas with dangerous
electric voltage. Non-observance of the warning signs causes
severe injuries or death. The work to be carried out may only be
carried out by a qualified electrician or an electrical safety
expert.
This warning sign is fixed at the following point:
›
At the terminals, under the cover.
2.6
For your safety
Mortal danger by electric voltage!
Touching live parts can be lethal. Damage to the insulation or to
individual components can be lethal.
›
If the insulation or any parts are damaged, switch off the
power supply at once and initiate repair.
›
Only qualified electricians or electrical safety experts may
carry out work on the electrical system.
›
Before commencing any work, switch off power supply and
secure against restarting. Test for absence of voltage.
›
Perform the electrical installation in accordance with the
applicable regulations.
›
Protective devices that are required according to national and
local regulations, e.g. residual current devices, must be
provided. These protective devices must be provided by the
customer.
›
Observe the information on the type plate.
›
Close all covers after all work is completed.
›
Keep moisture and dust away from live parts. Intruding
moisture and dust may cause a short circuit.
›
If the electrical connection is made during precipitation, e.g.
rain or snow, prevent the intrusion of moisture by means of
suitable protective covers.
›
During or after a lightning strike into the system, there is
danger to life if the components are touched or during a stay
in the immediate vicinity of the system. When mounting
outside, do not install and mount the pedestrian gate during
thunderstorms.
www.TURNSTILES.us | [email protected] | 303-670-1099
