ORIGINAL
Page 21
•
Place the sling along the back of the patient. Make sure to center and place the
sling correctly according to the instructions from the sling manufacturer.
Fig. 6.5.2
–
Placement of sling
•
Use the turning function of TurnAid T4 to reposition the patient onto the back.
Fig. 6.5.3
–
Returning to the back
•
Pull straps free from the opposite side.
•
Place all straps so they are ready for attachment to the lift.
•
Fold TurnAid T4 to
"folded-position"
(fig. 5.3)
•
Now, you can lift the patient.
6.6
Mobilising out of the bed
TurnAid T4 may be used as an aid when you mobilise the patient out of bed; below this is
shown in combination with a person turn table.
•
Power on TurnAid T4 by double-clicking (2 defined pushes)
.
•
Apply TurnAid T4's turning function as described above to situate the turn table under
the patient.
Fig. 6.6.1
–
Situation of person turning device
