TURFCO T3000 85872 Скачать руководство пользователя страница 7

Страница: 7 / 20

85872 RevA

TURFCO T3000 APPLICATOR

Description

The Turfco T3000 Applicator is an easy to operate,

comfortable, high production lawn applicator for dry

and spray products. The lawn applicator is capable

of spreading fertilizer or spraying at the rate of 4000

square feet per minute (371 square meters per

minute). The T3000 Applicator is a 4 wheel machine

using standard automotive style steering for directional

control and operator comfort. The front wheels are

the steering wheels and the rear wheels are the drive

wheels.

DS85872-01

SPREADER

HOPPER

SPRAY

NOZZLES

OPERATOR

CONTROLS

OPERATOR

POSITION AND

PLATFORM

FIGURE 1

Welcome

Welcome to the Turfco T3000 Applicator. This manual will describe the machine, give correct

operating procedures, and help you learn and understand correct operation. Operation of this

machine without training can result in injury to the operator or damage to the machine.

The operators position is standing on a vibration isolated

platform on the rear of the machine. The forward

and reverse speeds are controlled by using a simple

directional hand control allowing the operator total

control of the speeds from 0 to 5 MPH (0 to 8.04 Km/h).

Braking is provided by a dynamic braking system within

the hydrostatic transmission and a hand operated

parking brake. Releasing the speed control will stop the

machine. The machine is designed so that it will stop

movement if the operator dismounts and releases the

speed control.

DESCRIPTION

The Turfco T3000™ Applicator is a self-powered ride-on spreader/sprayer. The T3000 is intended to be used for

the application of properly prepared turf care liquid spray products and turf care granular products. The T3000 is

NOT intended to be used for any purpose other than the application of properly prepared turf care products to the

turf. Operation is intended to be at properly prepared worksites only.

Intended Use

Содержание T3000 85872





















Результаты поиска

Содержание T3000 85872

Отзывы:

Похожие инструкции для T3000 85872

Бренды по названию

Популярные бренды

TURFCO T3000 85872, Руководство оператора

Результаты поиска

Содержание T3000 85872

Отзывы:

Похожие инструкции для T3000 85872

Бренды по названию

Популярные бренды