Operation
This setting can be used for dry sand, ice melt, or
other materials that are difficult to spread; it may
also be used for hopper cleanout (see
Cleaning the
Spreader
section).
Caster Wheel Lock Foot
Pedal
Located on the right side of the operator platform
(see Figure 7).
Press and hold the caster wheel lock foot pedal to
lock the caster wheels in the straight position. Release
the foot pedal to unlock the caster wheels and allow
the machine to freely turn.
g271157
Figure 14
1.
Caster pin locking mechanism
Before Operation
Before Operation Safety
•
Evaluate the terrain to determine what accessories
and attachments are needed to properly and
safely perform the job. Only use accessories and
attachments approved by Z Turf Equipment.
•
Inspect the area where the equipment is to be
used and remove all rocks, toys, sticks, wires,
bones, and other foreign objects which may be
contaminated by chemicals and/or affect the
stability of the machine.
•
Wear appropriate clothing including safety glasses,
substantial slip-resistant footwear, and hearing
protection. Tie back long hair and avoid loose
clothing or jewelry which may get tangled in
moving parts.
CAUTION
This machine produces sound levels in excess
of 85 dBA at the operator’s ear and can cause
hearing loss through extended periods of
exposure.
Wear hearing protection when operating this
machine.
•
Do Not operate the machine when people,
especially children, or pets are in the area. Stop
the machine and attachment(s) if anyone enters
the area.
•
Do Not fill, calibrate, or clean the machine when
people, especially children, or pets are in the area.
•
Check all sprayer components for wear and leaks
before applying pressure to the system. Do Not
use if leaking or damaged.
•
Make sure the operator platform is clean and free
from chemical residue and debris buildup.
•
Check that the operator presence controls,
safety switches, and shields are attached and
functioning properly. Do Not operate unless they
are functioning properly. Frequently check for
worn or deteriorating components and replace
them with the manufacturer’s recommended parts
when necessary.
20
