turck TN-IOL2 Series, Инструкция по эксплуатации

Страница: 15 / 36

V01.00 | 2021/05
15
8 Setting and Parameterization
8.1 Settable functions and features
The following functions and properties can be set via the IO-Link interface:
n
Operating mode for SIO mode:
– Querying the presence of tags ( Tag presence )
– Comparing tags ( Data update )
– Alarm output
n
Output configuration Q1 and Q2: NC contact or NO contact
n
RSSI limit value for alarm outputs and setting the optimum detection range
n
Type of the alarm outputs: time-triggered or RSSI-triggered
n Password
More information on setting the device via IO-Link is provided in the IO-Link parameter manual.
8.2 Setting with IO-Link function block
The read/write heads can be set and configured via IO-Link function blocks. The function blocks
for the CODESYS V3 and Siemens TIA V14 programming environments are available as free
downloads from
www.turck.com .
Further information on programming the function blocks is provided in the description of the
process data.
Function block for CODESYS V3
Fig. 7: Function block for CODESYS V3