turck TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL, Инструкция по эксплуатации

Страница: 31 / 165

23
2018/02
TBIP-L…-FD
IO1-2
IOL- Safe I/
O chann
e
ls
3.6 Universal Standard I/Os
The function description of the unsafe universal I/Os can be found in the separate documentation
Part 2: User manual TBIP-L…-FDIO1-2IOL – Standard I/O channels.
3.7 IO-Link Master Channels
The function description of the unsafe IO-Link master channels can be found in the separate docu-
mentation Part 3: User manual TBIP-L…-FDIO1-2IOL - IO-Link master.
3.8 Configuration Memory
A pluggable memory stick is included in the scope of delivery of TBPN-L1-FDIO1-2IOL. It serves for
storing the safety function configured via Turck Safety Configurator.
It allows to transfer the configuration of one device to another device (device exchange).
the safety function is configured via Turck Safety Configurator (see chapter 8 , Configuring with
Turck Safety Configurator and Rockwell Studio 5000 ).
3.8.1 Storing a Configuration
The safety function is automatically stored to the memory stick after a configuration has been
downloaded to the device via Turck Safety Configurator.
HINWEIS
Non-safety-related configurations as for example the IP address or the parameterization
of the IO-Link and the standard I/O channels will not be stored on the memory chip.
Storing a Configuration at Device Start
Prerequisites
 Empty memory chip
 Device has stored a valid configuration
 Power supply switched-off
Procedure

Plug the empty memory chip into the device

Switch-on the power supply

The configuration will be loaded from the device to the memory stick during device start.
