turck TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL, Инструкция по эксплуатации

Страница: 137 / 165

11
V01.0| 2017/04
TBPN-L1
-FDIO1-2IOL -
Standard IO-Link
2.5.2 Process Input Data – IO-Link Master Channels
Word Bit 15 Bit 14 Bit 13 Bit 12 Bit 11 Bit 10 Bit

9
Bit

8
Bit

7
Bit

6
Bit

5
Bit

4
Bit

3
Bit

2
Bit

1
Bit

0
Ba
sic
n + +1 DXP15
C7P2 DI14
C7P4 DXP13
C6P2 DI12
C6P4 - -
n + 2 - DVS14 - DVS12 -
...
IO-Link chan-
ne
ls
n + 11

…

n + 26
IOL1 – process input data (connector C6)

Structure depends on the channel parameterization
n + 27
…

n + 42
IOL2 – process input data (connector C7)

Structure depends on the channel parameterization
Diagnostics
Overcurrernt sensor supply (IOL1)
n + 43 - VERRV1
K1213 -
Overcurrent output
n + 44 SCO15 - SCO13 -
IO-Link port diagnostics
IOL1 (connector C6)
n + 45 GENR OVL VHIGH VLOW ULVE LLVU OTMP PRM

ER
EVT2 EVT1 PD

INV
HW

ER
DS

ER
CFG
ER PPE -
IOL2 (connector C7)
n + 46

Assignment similar to port IOL1
IO-Link
Events
n + 47 Port (1st Event) Qualifier (1st Event)
n + 48 Event Code (1st Event)
…
n + 77 Port 16th Event) Qualifier (16th Event)
n + 78 Event Code (16th Event)
Name Value Meaning
DXPx
CxPy 0 Input active
1 Input active
DVSx Input value valid (Data Valid Signal)
0 The IO-Link data are valid.

Possible causes:
–
Sensor supply is below the admissible range,
–
IO-Link port is parameterized as simple digital input,
–
No device connected to the masters,
–
No input data received from the connected device (only valid for devices with an
input data length > 0),
–
No reaction from the connected device to the sending of output data (only valid
for devices with an output data length > 0),
–
The connected device sends an error "process input data invalid.
1 The IO-Link data are valid.