turck TBEN-S2-2COM-4DXP, Инструкция по эксплуатации

Страница: 74 / 171

Commissioning
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com 68
7.4.9 VSC-Vendor Specific Classes
In addition to supporting the above named CIP Standard Classes, the TBEN-S2-2COM-4DXP mod-
ules support the vendor specific classes described in the following.
Class Instance of the VSCs
The general VSC - class instance attributes are defined as follows.
Class Code Name Description
Dec. Hex.
100 0x64 Gateway Class, s.
p. 69
Data and parameters for the field bus specific
part of the device.
139 0x8B COM Class s.
p. 72
Data and parameters for the COM ports of the
device.
140 0x8C RS Data/SCB Class s.
p. 75
Data of the connected serial devices, data and
parameters for the connected Modbus servers.
141 0x8D MB-Server Timing Timing data for connected Modbus servers.
142 0x8E DXP Class Data and parameters for the DXP channels of the
device.
164 0xA4 Ext. DXP Functions Class Parameters for the extended digital functions of
the DXP channels.
NOTE
The class instance attributes are the same for each Vendor Specific Class.
The class-specific Object Instances and the corresponding attributes are explained in the
paragraphs for the different VSC.
Attr. No. Attribute name
G
et/
S
et
Type Description
Dec. Hex.
100 0x64 Class revision G UINT Contains the revision number of the
class
(maj. rel. *1000 + min. rel.).
101 0x65 Max. instance G USINT Contains the number of the highest
instance of an object created on this
level in the class hierarchy.
102 0x66 # of instances G USINT Contains the number of Object
Instances created in this class.
103 0x67 Max. class attribute G USINT Contains the number of the last class
attribute to be implemented.