turck TBEN-S2-2COM-4DXP, Инструкция по эксплуатации

Страница: 30 / 171

Commissioning
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com 24
7.2.3 PROFINET IO Device Model
The technical properties of PROFINET IO devices are defined via their device description file, the
GSDML file. A PROFINET IO device consists of 1…n slots, which can also contain 1…n sub slots. Sub
slots are placeholders for sub modules and establish the interface to the process. Sub modules can
contain parameters, data and diagnostics.
Slot 0 is always reserved as Device Access Point (DAP). The DAP contains the physical interface to
the Ethernet network and represents the device. The other slots or sub slots represent the other
device functions. The structure is defined by the manufacturer of field devices. It is not necessary
that every slot/sub slot is related to physical functions. This device model allows manufacturers to
design modular and flexible decentral field devices. User are flexible in configuring decentralized
field devices.
7.2.4 TBEN-S2-2COM-4DXP – Slots and Sub slots (Overview)
Besides Slot 0 (DAP) all other slots of TBEN-S2-2COM-4DXP contain only one sub slot. for this rea-
son slots and sublots are described as synonyms in the following.
Slot-no. Name Description Pluggable devices
0 TBEN-S2-2COM-4DXP This slot represents the access to
the device via PROFINET, Device
Access Point.
–
Device Access Point
–
Ethernet interface
–
Ethernet port 0
–
Ethernet port 1
1 COM channel 0 This slot defines the function of
the first COM port (COM0).
–
RS232 simple ( s.
p. 27
)
–
RS232 advanced ( s.
p. 28
)
–
RS485 simple ( s.
p. 29
)
–
RS485 advanced ( s.
p. 30
)
–
MB Client RS232 ( s.
p. 32
)
–
MB Client RS485 ( s.
p. 32
)
2…9 Buffer/server channel 0 Slots 2 to 9 are used to configure
the data buffer for the in- and
output data or to configure
server connected via Modbus
RTU. The settings relate to COM0.
–
RS Data 24Byte IN/24Byte OUT
(
s.
p. 31
)
–
MB-Server 1 Reg. IN/1 Reg. OUT
–
( s.
p. 28
)
–
MB-Server 12 Reg. IN/12 Reg. OUT
(
s.
p. 28
)
10 COM channel 1 Slot 10 defines the function of
the second COM port (COM1).
–
RS232 simple ( s.
p. 27
)
–
RS232 advanced ( s.
p. 28
)
–
RS485 simple ( s.
p. 29
)
–
RS485 advanced ( s.
p. 30
)
–
MB Client RS232 ( s.
p. 32
)
–
MB Client RS485 ( s.
p. 32
)
11 -18 Buffer/server channel 1 Slots 11 to 18 are used to config-
ure the data buffer for the in- and
output data or to configure
server connected via Modbus
RTU. The settings relate to COM1.
–
RS Data 24Byte IN/24Byte OUT
(
s.
p. 31
)
–
MB-Server 1 Reg. IN/1 Reg. OUT
–
( s.
p. 32
)
–
MB-Server 12 Reg. IN/12 Reg. OUT
(
s.
p. 33
)
19 COM diagnostics Slot 19 is used to map the cyclic
diagnostic data. COM diagnostics ( s.
p. 34
)