turck LUS211 Series, Инструкция по эксплуатации, Страница: 37 / 41

V01.00 | 2021/11
37
14.3 Technical data – LUS211-…-LI2UPN8-H1141
Technical data LUS211-40-…-LI2UPN8-H1141 LUS211-130-…-LI2UPN8-H1141
ID LUS211-40-51…: 100003167 LUS211-130-51…: 100003169
LUS211-40-34…: 100003168 LUS211-130-34…: 100003170
Function Ultrasonic diffuse mode senor
Range 5…400 mm 130…1300 mm
Resolution 0.5 mm 1 mm
Minimum measuring range 50 mm 100 mm
Minimum switching range 5 mm 10 mm
Ultrasonic frequency 320 kHz 200 kHz
Temperature drift 1.5 % of full scale
Edge length of the norm target 20 mm 100 mm
Approach speed ≤ 3 m/s ≤ 10 m/s
Traverse speed ≤ 1.3 m/s ≤ 2 m/s
Operating voltage 17…33 VDC
No-load I
0
≤ 150 mA
Maximum current per
switching output 250 mA
Load resistance ≤ 1000 Ω
Residual current ≤ 0.1 mA
Response time, typically 60 ms 90 ms
Readiness delay 300 ms
Communication protocol IO-Link
Output function NO contact/NC contact, PNP, analog output
Output 1 Switching output or IO-Link mode
Output 2 Analog output
Current output Default: 4…20 mA
Load resistance current output ≤ 0.5 kΩ
Voltage output Default: 0…10 V
Load resistance voltage output ≥ 8 kΩ
Switching frequency 5 Hz 6.5 Hz
Hysteresis 5 mm 10 mm
Voltage drop at I
e
≤ 2.5 V
Short-circuit protection Yes
Reverse polarity protection Yes
IO-Link
IO-Link specification V1.1
IO-Link port type Class A
Communication mode COM 2 (38.4 kBaud)
Process data width 32-bit
Measured variable information 28-bit
Switching point information 4-bit
Frame type 2.2