turck LUS211 Series, Инструкция по эксплуатации, Страница: 26 / 41

Setting
26
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
9.2.8 Parameters in the main menu
Default values are shown in bold type.
Explanation Options Function
ou1 Function of output 1 Hno Hysteresis function (NO = NO contact)
Hnc Hysteresis function (NC = NC contact)
Fno Window function (NO = NO contact)
Fnc Window function (NC = NC contact)
SP1…SP4 Switching point 1...4 for
hysteresis function
ou1…ou4: Hno/Hnc Upper level at which the outputs 1…4 change their
switching state
Default: 50 % of the detection range
rP1…rP4 Reset switching point 1...4 for
hysteresis function
ou1…ou4: Hno/Hnc Lower level at which the outputs 1…4 change their
switching state
Default: 75 % of the detection range
FH1…FH4 Upper switching point for
window function
ou1…ou4: Fno/Fnc Upper switching point at which outputs 1…4 change
their switching status
Default: 50 % of the detection range
FL1…FL4 Lower switching point for
window function
ou1…ou4: Fno/Fnc Lower switching point at which outputs 1…4 change
their switching status
Default: 75 % of the detection range
ou2 Function of output 2 Hno Hysteresis function (NO = NO contact)
Hnc Hysteresis function (NC = NC contact)
Fno Window function (NO = NO contact)
Fnc Window function (NC = NC contact)
Analog output Auto Automatic detection (4…20 mA/0…10 V)
4-20 4…20 mA
0-20 0…20 mA
20-4 20…4 mA
20-0 20…0 mA
0-10 0…10 V
0-5 0…5 V
1-6 1…6 V
10-0 10…0 V
5-0 5…0 V
6-1 6…1 V
rtio 0.5…4.5 V
ASP Start point of the analog signal
ou2: Auto/analog values/rtio Measured value at which the analog output signal
has its start point
Default: Min. detection distance
AEP End point of the analog signal
ou2: Auto/analog values/rtio Measured value at which the analog output signal
has its end point
Default: Max. detection distance
ou3 Function of output 3 Hno Hysteresis function (NO = NO contact)
Hnc Hysteresis function (NC = NC contact)
Fno Window function (NO = NO contact)
Fnc Window function (NC = NC contact)