turck High-End RU130 Series, Инструкция по эксплуатации

Страница: 51 / 52

25
more@turck.com • www.turck.com • 2015/02
EC Conformity/Approvals
Technical Data RU40…-M18… RU130…-M18… RU130…-M30… RU300…-M30…
Storage temperature -40…+80 °C
Weight 51 g 51 g 105 g 105 g
Switching hysteresis 5 mm 10 mm 10 mm 25 mm
Switching frequency 7Hz 8 Hz 8 Hz 4 Hz
Response time 75 ms 65 ms 65 ms 125 ms
Readiness delay ≤ 300 ms
Approvals CE, cULus
15.1 Factory settings
Setting RU40…-M18… RU130…-M18… RU130…-M30… RU300…-M30…
Output behavior
Switching output 2
NO contact NO contact NO contact NO contact
Output behavior
Switching output 4
4…20 mA 4…20 mA 4…20 mA 4…20 mA
Analog range Teach-in range =
Sensing range
Teach-in range =
Sensing range
Teach-in range =
Sensing range
Teach-in range =
Sensing range
Switch point 40 cm (end of sens-
ing range)
130 cm (end of sens-
ing range)
130 cm (end of sens-
ing range)
300 cm (end of sens-
ing range)
Operating mode Normal operation Normal operation Normal operation Normal operation
For the factory settings of the IO-Link parameters see the IO-Link parameter overview in the document “IO-Link
parameters for “High End” ultrasonic sensors” (D102012).
16 EC Conformity/Approvals
16.1 Conformity with EC directives
The product is subject to the following EC directive:
■
2004/108/EC (EMC Directive)
Conformity with this directive is achieved by observing the following harmonized standard:
■
EN 60947-5-2:2007 (Low Voltage Switchgear and Controlgear, Part 5-2: Control circuit devices and switch ele-
ments – proximity switches)
The EC declaration of conformity is available for download from the TURCK product database.
16.2 Approvals: cULus
Further requirements for mounting in UL installations:
■
Use the same voltage for all circuits.
■
Install the ultrasonic sensors with UL-listed connection cables (approved for 30 V and 0.15 A min.) in the electri-
cal installation of the plant.
Ultr
asonic sensors
“H
igh End“