turck FS100 L Series, Инструкция по эксплуатации

Страница: 27 / 34

Setting
Setting via IO-Link
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
V02.00 | 2022/08 | 27
Output TEMP: NO/NC changeover
The switching outputs can optionally be used as normally open or normally closed. If the
sensor has more than one switching output, the outputs can be configured differently. Each
switching output is configured as normally open by default.
Menu LED indicator bar
Display of the current (active) output function:
NO (normally open)
NC (normally closed)
A Changing the TEMP output from NO to NC
LEDs 5…7 off (NO), LEDs 4 and 8 flash green.
Change the output function from NO to NC:
„ Press and hold [SET] for at least 3 s until LEDs 4 and 8
first flash green quickly and then return to a constant
green.
+
Hz
+
Hz
„ Press [SET].
ð LEDs 4…8 are green (NC).
„ Save the output function: Press [Enter].
ð LED bar briefly flashes green twice. The next menu
appears.
2x
B Changing the TEMP output from NC to NO
LEDs 4…8 are green (NC), LEDs 4 to 8 flash green.
Change output function from NC to NO:
„ Press and hold [SET] for at least 3 s until green LEDs 4
to 8 first flash green quickly and then return to a
constant green.
+
Hz
+
Hz
+
Hz
+
Hz
+
Hz
„ Press [SET].
ð
LEDs 5…7 off (NO)
„ Save the output function: Press [Enter].
ð
LED bar briefly flashes green twice. The next menu
appears.
2x
9.3 Setting via IO-Link
The device can be parameterized within the technical specifications (see data sheet) via the
IO-Link communication interface — both offline, e.g. with the configuration tool, and online via
the controller. An overview of the different functions and properties that can be set and used
for IO-Link mode or SIO can be found in chapter 8 "Setting" and in the IO-Link parameter
manual for the device. Detailed instructions on the parameterization of devices via the IO-Link
interface are provided in the IO-Link commissioning manual.
All parameters can be changed in IO-Link mode via the controller, both during commissioning
and during operation. In SIO mode, the device operates in accordance with the most recent
setting configured in IO-Link mode.