turck FGEN-AIM Series, Руководство пользователя

Страница: 83 / 203

D301271 1013 - FGEN - multi protocol
7-29
VSC-Vendor Specific Classes
7.4.2 Gateway Class (VSC 100)
This class contains all information which refers to the whole station not to the different
I/O channels.
Class instance
Object Instance 1
Note
Please refer to paragraph Class instance of the VSC (page 7-28) for the description of the class
instance for the VSC.
Table 7-23:
Object instance 1,
Boot instance
Attr. No.
dec.
(hex.)
Attribute name G et/
S et
Type Description
100
(64h) Max object
attribute G USINT Contains the number of the last object
attribute to be implemented.
101
(65h) Hardware revision G STRUCT Contains the hardware revision number of the
station (USINT Maj./USINT Min.)
102
(66h) Firmware revision G STRUCT Contains the revision number of the Boot
Firmware (Maj./Min.).
103
(67h) Service tool ident
number G UDINT Contains the BOOT ID number that serves as
an identification number for the software I/O-
ASSISTANT
104
(68h) Hardware
info G STRUCT Contains station hardware information (UINT):
– count (number of the following entries)
– CLOCK FREQUENCY (kHz)
– MAIN FLASH (in kB)
– MAIN FLASH SPEED (ns)
– SECOND FLASH (kB)
– RAM (kB),
– RAM SPEED (ns),
– RAM data WIDTH (bit),
– SERIAL EEPRPOM (kbit)
– RTC SUPPORT (in #)
– AUTO SERVICE BSL SUPPORT (BOOL)
– HDW SYSTEM