turck BL20-GW-CANOPEN, Руководство пользователя, Страница: 44 / 95

BL20 - Gateway for CANopen
D301087 1211 - BL20 CANopen 4-14
4.6.2 Service Interface Connection
The following cable can be used to connect the service interface (female PS/2 connector) to a PC for the
purpose of using I/O-ASSISTANT (project planning and diagnostic software).
„
special I/O-ASSISTANT-connection cable from TURCK (IOASSISTANT-ADAPTERKABEL-BL20/BL67;
Ident-no.: 6827133)
Connection with I/O-ASSISTANT
-
Connection Cable
The I/O-ASSISTANT-cables have a PS/2 male connector (connection for female connector on gateway)
and a SUB-D female connector (connection for male connector on PC).
Figure 4-10:
BL20-gateway
connected to PC
via special cable
A SUB-D socket
B BL20 connecting
cable
C PS/2 plug
Figure 4-11:
PS/2 male
connector on the
connection cable
to the gateway
(top view)
Figure 4-12:
9-pole SUB-D
female connector
on the cable for
connecting to PC
(top view)
Table 4-9:
Pin assignments
for PS/2 and SUB-
D interfaces Pin BL20 gateway PS/2
socket SUB-D interface on PC Pin
1 +5 V Gw DTR, DSR 4, 6
2 GND GND 5
3 – – –
4 TxD RxD 2
5 /CtrlMode RTS 7
6 RxD TxD 3
4 3
1 6
2 5
5 4 3 2 1
9 6 7 8
1 2 3 4 5
6 9 8 7