turck 100000897, Инструкция по эксплуатации

Страница: 45 / 106

V02.00 | 2021/05
45
7.2.3 RFID Test – main menu
Fig. 42: RFID Test – main menu
The main menu provides the following functions:
Icon Function Description
Help on the DTM Starts the DTM help.
Start trigger/ON
or
Stop trigger/OFF Starts the trigger for command execution (standard view).
Ends the trigger for command execution ( displayed after
clicking the start button).
Configure message content Displays the content to be transferred with a read operation.
The following can be selected:
n
Phase
n RSSI
n
Slot
n
Time
Switch mode (report/polling) Switches between Report mode (automatic read/write) and
polling mode (read/write started through an explicit polling
command).
Reading the reader status Calls the status of the reader and provides the information in
the
Logger window.
Reading the reader version Calls the following information from the reader and provides
the information in the
Logger window:
n
Hardware revision
n
Firmware status
n
Serial number
Resetting the reader Offers three ways of resetting the reader:
n
Voltage reset
n
Factory reset: Reset to factory settings
n
Reset the reader status
When resetting to factory settings, any modified transfer rate
or RS485 address is not changed because the reader could
not otherwise be addressed any longer.
Set the current window layout as
the default Saves the individually set window layout.
Reset window layout Resets the window layout.
HF diagnosis Opens the window for HF diagnostics.
Firmware update Opens the window for the firmware update.