Page 23 of 24
Turbovex A/S
Industrivej 45, DK – 9600 Aars
Telefon: +45 96 98 14 62 – Fax: +45 98 96 42 24
e-mail:
–
www.turbovex.dk
8.2.0 Cleaning of exchanger
It is recommended to clean the exchanger once a year.
Loosen the set screws using an Allen key and open the front Cover.
Remove the cover and pull out the heat exchanger. Gently clean the heat exchanger
using a vacuum cleaner.
Reinsert the heat exchanger and mount the cover.
If necessary replace the exhaust filter
Close the front Cover.
Make sure to tighten the set screws to avoid
any leakage in the unit.
Cover
Note!
Shut off the supply voltage before opening
the front Cover.
Set screws
Heat exchanger
