Page 15 of 24
Turbovex A/S
Industrivej 45, DK – 9600 Aars
Telefon: +45 96 98 14 62 – Fax: +45 98 96 42 24
e-mail:
–
www.turbovex.dk
There are two different approaches of locating the main circuit board.
1. Open the left hand side of the unit and remove the service hatch.
2. Remove the front panel.
The front panel can be removed by loosening the set screws with an Allen key.
The main circuit board will be found in the left side of the unit. See figure 2 page 5.
Mount the front panel and/or sides and the unit is ready for use. Make sure to tighten the
set screws, otherwise leakage may occur in the unit.
Set screw
Note!
The power connection must be performed by a professional electrician.
