background image

user manual 

QLight

 series 

INTRODUCTION 

 
Thanks 

Thank you for choosing a QLight 300 series loudspeaker product for your application. Please spare 
a little time to read the contents of this manual, so that you can obtain the best possible 
performance from this unit. 

All TURBOSOUND products are carefully engineered for world-class performance and reliability. 

If you would like further information about this or any other TURBOSOUND product, please 
contact us. Detailed product information is available on our web site at www.turbosound.com 

We look forward to helping you in the near future. 

Congratulations, you have just purchased a professional loudspeaker system from the renowned 
Turbosound range, designed to give you the best in audio quality and many years of reliable, 
trouble free operation. It offers superior audio quality, unsurpassed vocal projection, full technical 
documentation including EASE data, and comprehensive rigging and flying hardware options. 
Please read through this manual carefully before you attempt to operate the loudspeaker system. 
It contains valuable information enabling you to quickly and easily set up and connect the 
loudspeakers, important system and set-up checks together with positioning and mounting 
instructions. 

 

Unpacking the TQ series loudspeaker 

After unpacking the unit please check carefully for damage. If damage is found, please notify the 
carrier concerned at once. You, the consignee, must instigate any claim. Please retain all 
packaging in case of future re-shipment. 

 

 

 

TQ-300 series manual 

page 3 

Содержание QLight TQ-310




















Отзывы: