WS 1 6 2 P C B A P r od u c t G u i d e V1 . 3 en
TUNERSYS
T U N E RS YS W S 1 6 2 W i F i In t e r n e t Ra d i oB lu e t o o t h A m p l if i e r B oa rd fo r B oo k s h e l f S p e a ke r G u i d e
9. Configuration
Here you will find the complete settings / options available to configure your own tuner. On
the main menu, navigate to Configuration setting. Press OK and you will see a list of options
available.
Wi-Fi Network
• Add / Remove AP
Add AP - It will scan for a list of routers around.
Remove AP - If you have already added a router and want to remove it, choose this option.
Note - Always bring the Amplifier within 2 meters of the Wi-Fi router for best results.
• AP: [ ]
If you have added more than one routers on the radio and want to switch to another one,
select this option to change.
• Signal
This is to show the strength of the Wi-Fi Signal of the Wi-Fi router as received by the
radio. Usually signal levels lower than -70dBm is at weaker level and if it affects the
reception of your radio, you may need to optimize the router location or check any
problem of the router itself.
• IP
The IP is set Dynamic by default. Select to change Fixed IP according to your network
condition.
• DNS
The DNS is set Dynamic by default. Select to change <Fixed> DNS according to your
network condition.
Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country. There may be variation between
different countries. Therefore it is necessary to choose the Wi-Fi channels to ensure the Wi-
Fi
performs satisfactory.
We have already set the channels according to the requirement in different countries.
Choose the country you are staying from the list to get the correct channel. The
Europe/United Kingdom is set by default, press [OK] on the Remote control or push the
[Tune/Select] knob on mian unit to edit the country selection. Adjust backlight level when
power off and Under night or dark environment When Power off,You can off or Adjust the
Indicator LED Light and backlight level for the display as you prefer.press and hold the
[Power/Menu ] knob on main unit or press the [Power/Menu ] button on remote to turn off
the main unit
，
then adjust the backlight level as you like by rotating the [Tune/Select] knob
on mian unit or [▲/▼] button on remote. There are 24 settings : Level 0 to 24, Can Keep
Date and time display and The Indicator LED light and backlight is off when Level set to 0
Page5
Page4
Tel:
+
86-756-362 6622
https://www.tunersys.com
Eamil
：
Instagram:@tunersysradio
Facebook: tunersysradio
Twitter: @tunersys_com
Adress
:
ROOM 213,BUILDING D4,NO.1,SOFTWARE PARK
ROAD,TANGJIA BAY,HIGH-TECH ZONE,ZHUHAI,CHINA
Indicator Lights
Source State
Blue
UPnP
Red
Internet radio/My favourite
Purple
Blue tooth
NC
AUX
Sources Status Indicators
5. Bluetooth playback
Before transmission between your Bluetooth device and the radio is possible, both de-
vices must be coupled. This process is called "pairing". The Tuner is served as a re-
ceiver, to receive music stream to play on the Tuner.
If you have already paired a Bluetooth device before, this connection will be restored
automatically when both devices are in range and Bluetooth operation has been selected
on the radio. "Pairing" does not have to be repeated. This function may need to be acti-
vated in your Bluetooth device, however.
• Push the Menu button to display the selection menu for the different playback modes.
• Use the up / down button to select the playback mode Bluetooth and push the dial
switch.
• Switch your Bluetooth device to which you want to connect the radio on and activate the
pairing mode here. The device scans for Bluetooth devices in the reception range.
• When the radio is found, your bluetooth device shows its name TUN01-L-XXXX (the
XXXX is an identification code for your radio unit).
• Select the radio at your BT device.
• Start playback on your BT device.
• Playback now takes place using the radio.
6. Alarm Setting
• Choose Alarm from the main menu or press the [Alarm] button on the remote control.
• Select either Alarm 1 or Alarm 2, choose Turn on to activate the Alarm.
• Follow the alarm wizard instructions to set the alarm.
• The wizard will guide you through the settings below:
Time - Set the time for the alarm
Sound - You can choose Wake to My Favourite, Tone as the alarm source.
Wake to My Favourite - Please preset your favorite station before setting this as
the alarm source. Repeat -You can schedule the alarm as you desire —Everyday, Once
or multiple days.
Alarm Volume - Adjust the volume of the alarm as you like by rotating the [Tune/Select]
knob on main unit or [▲/▼] button on remote.
• After the above settings are completed, press the [◄] button to exit and make sure the
Alarm is turned on. You will see the Alarm icon appeared on the display if it is activated.
7. Sleep Timer Setting
You can set the timer to let the radio goes standby after the selected time elapsed in the
range of 15 minutes to 180 minutes.
Press [Sleep] button on the remote control to set the timer.
You will see the icon appeared on the display if the timer is set.
8.Home page menu
•My Favourite/Internet Radio/Media Centre/Blue tooth/AUX-in/Alarm/Sleep/Timer/
Configuration
8.0,Configuration and Main function Introduce
8.1,Alarm:2 Alarm: Alarm1 Alarm 2;
Into Alarm 1 or Alarm 2 And Set Alarm off or on Set a Alarm time when Alarm on
Sound(Alarm): Set a Alarm tone or a Station or song From My Favourite or UPnP/DLNA
Media Centre;
Repeat(Alarm): Every/Day/oncs/Monday/Tuesday/Wednesday/Thursday/Friday/
Staurday/Sunday;Alarm Volume: Can Set a suitable level;
Sleep Timer:Turn Off,15,30,45,60,90,120,150,180Minutes
Configuration: Network,Date & time,Language,Location Radio,
Playback setup:Repeat all/ Repeat one/Shuffle<br>
My name setup:Rename;
Resume when power on:When "power on" reboot to automatically restore the song or
station that was played during the previous shutdown.When "power off", restart and play
normally;
Contrast for LCD Display: 30~63%;Buffer Time: 2 Seconds/5 Seconds;
Aux in Grain :0dB / 6dB;Information:Network/Syetem Information;
Software Update;Reset to Default;
Dimmer: Mode set Dim/Normal;Level set:Bright 0~100%, Dimmer 0~100%; Language
Choose:Deutsch/English/Espanol/Francais/Italiano/Nederlands/Polski/Pyccknn/Chinese;
Configuration: Network.
Speaker Right -
Speaker Right +
Antenna for WiFi & Bluetooth
Speaker Left -
Speaker Left +
