TL60ECV
-
Section 11: Diagnostics 11-2
Troubleshoot Plastic Film and Carriers
1.
Plastic film rips while wrapping:
• Hot weather causing adhesive tack buildup on rollers. Remove the adhesive with soap and water.
• Spray plastic wrap carrier rollers
(A)
with WD40.
• Store plastic rolls in a cool dry place before use.
OR
• Poor quality plastic, use a brand with good tear resistance.
2. Wrinkles in wrapped plastic with seams between layers visible:
•
Check to determine if the plastic is properly routed through the carrier rollers. Install the plastic film
rolls according to the Plastic Installation diagram, refer to
.
3.
Plastic film carrier rollers not turning freely:
• Bearings have too much end pressure. Loosen the bolts holding the bearing.
OR
• Roller gears
(B)
meshed too tight. Slightly loosen one set of bearing bolts. Using a hammer and
punch, lightly tap the bearing away from the other roller.
CAUTION:
Do not use a hammer on the aluminum stretcher rolls.
4.
Plastic film sticks to bale spears and tears the plastic inside the bale.
•
Ensure bale sit firmly on the bale deck, bale spears should deflect the hay somewhat.
A
B
Содержание TL60ECV
