8-2
Section 8: Transporting Balewrapper -
TL60ECV
Tire Pressure
• Maintain proper tire pressure of 36 psi at all times.
•
Do not over fill.
• Replace tires with same type if possible, or with same outside diameter.
Observe Maximum Transport Speed
The maximum transport speed for this implement is 32 km/h (20 mph).
DANGER:
Exceeding the implements maximum transport speed can
result in:
• Loss of control of the tractor/implement combination.
• Reduced or no ability to stop during braking.
• Implement tire failure.
• Damage to the implement structure or its components
WARNING:
Reduce speed when towing under adverse surface conditions,
when turning, and when on inclines. Do not attempt transport if the fully
loaded implement weighs more than 1.5 times the weight of the tractor.
DANGER:
Do not allow riders on machine while transporting or operating.
DANGER:
Do not climb on the bale deck or inside the wrap chamber
while engine running.
Storage
•
Extend the longevity of your machine store in sheltered area out of the elements and on a flat
surface.
• Chock wheels after parking.
• Refer to
for recommended service and maintenance
• Cover balewrapper if necessary or preferred.
Slow Moving Vehicle (SMV) Sign
Swing SMV sign back into closed rear facing transport position if it
has been flipped out during wrapping operation.
Содержание TL60ECV
