TL60ECV
-
Section 8: Transporting Balewrapper 8-1
Section 8: Transporting Balewrapper
Transport Lock
• Raise rear cam axle. Refer to
Control Screen
Operation
,
.
• Engage transport lock by lifting spring pin
(A)
and
swinging lock arm
(B)
over transport lock shaft
(C)
.
See
Fig.1
.
Disconnect Battery
Disconnect positive (+) red cable from battery located on right side of machine. Refer to
.
Fuel Shutoff - 13hp Engine Only
• Undo steering, unfold tongue and insert lock pin.
• Hitch tongue
(A)
to power unit drawbar with pin.
• Fasten safety chain
(B)
securely to power unit.
• Insert balewrapper’s 7-pin connector
(C)
into
power unit’s matching receptacle. Refer to
Lighting & Marking
,
• Make sure parking brake is released before
driving away.
Fig .1
Transport lock shown in locked position .
A
C
B
Fig .1
DANGER:
Balewrappers equipped with 13hp Honda GX390
engine must have fuel valve
(A)
shutoff before transporting to
avoid fuel spillage and engine damage. See
Fig.1.
Power Unit Hookup
A
Fig .1
A
B
C
Содержание TL60ECV
