Tubeline Nitro 275RS, Инструкция оператора и каталог запасных частей

Страница: 19 / 76

Nitro 275RS - Section 3 - Transportation / Storage 3-1
Section 3 - Transportation / Storage
Transport Safety
1. Comply with state and local laws governing
safety and transporting of machinery on public
roads.
2. Do not exceed a safe travel speed. Slow
down on rough terrain and while cornering.
3. Never allow riders on the machine.
4. Keep tractor drawbar and Nitro hitch parallel.
An uneven PTO may shear off a spline shaft.
Below diagram shows standard tractor
dimensions matching the front PTO on the
Nitro spreaders.
Storage Safety
1. Store the Nitro Manure Spreader in an area
away from human activity.
2. Do not allow children to play on or around the
Nitro Manure Spreader.
3. Store the Nitro Manure Spreader in a dry,
level area.
Maintenance Safety
1. Good maintenance is your responsibility. Poor
maintenance is an invitation for trouble.
2. Follow good shop practices.
• • Keep service area clean and dry
• • Be sure electrical outlets and tools are
properly grounded
• Use adequate light for the job at hand
3. Never attempt to service hydraulic
applications while pressurized or with engine
running.
4. Never work under equipment unless it is
blocked securely.
5. Always use personal protection devices such
as hand, eye and hearing protectors, when
performing any service or maintenance work.
6. Where replacement parts are necessary for
periodic maintenance and servicing, genuine
factory replacement parts must be used to
restore your equipment to original
specifications. The manufacturer will not be
responsible for injuries or damages caused
by the use of unapproved parts and/or
accessories.
7. A fire extinguisher and first aid kit should be
kept readily accessible while performing
maintenance on this equipment.
8. Periodically tighten all bolts, nuts, and screws
and check that all electrical connections are
properly secured to ensure unit is in a safe
condition.
9. When completing maintenance or service
function, make sure all safety shields and
devices are installed before placing unit into
service.