Tube-Line TL1700SR, Руководство оператора

Страница: 48 / 55

TL1700SR -
Section 9: Auto Control Option 9-3
Remote Control
WRAP
TIP UP
FORWARD
CUT &
HOLD OFF CUT &
HOLD ON
CANCEL/ HOME
STOP
ON
OFF
REVERSE
TIP DOWN
LOAD
The provided remote control is used in both
manual or automatic wrapping and greatly
increases productivity in one man operations. It
has a direct line of sight range of 1000 ft (300m).
ON : Press to wake remote from inactive state.
OFF
: Press to power off remote. Remote
automatically deactivates after 3 minutes of
inactivity.
TIP DOWN : Press and hold for 3 seconds
to manually tip the turntable down to unload
wrapped bale. Only required in
MANUAL TIP
MODE .
TIP UP : Press and hold to raise the turntable
back to its level wrapping position. If the turntable
will not raise, press the
TIP DOWN button for 3
seconds. Only required in MANUAL TIP MODE .
Fig.5
LOAD : Press to rotate turntable to preset loading position AUTO FROM LOAD POSITION .
WRAP : Press to start auto wrap cycle. The lit LED below this button shows the current wrapping mode.
RVS (Reverse): Press to manually run turntable counterclockwise. This feature can be used in auto modes to
interrupt cycle.
FWD (Forward): Press to manually run turntable clockwise. This feature can be used in auto modes to interrupt
cycle.
CUT & HOLD ON/OFF : Not available at time of print.
CANCEL/HOME : Stops wrapping cycle in place.
STOP : Stops wrapping cycle in place.