Tube-Line NITRO 275RS, Руководство оператора

Страница: 42 / 49

Nitro -
Section 8 - Optional Flow Control 8-2
Manual Flow Control Adjustment
The manual flow control option controls the hydraulic
flow to the apron chain gearbox. To change the apron
chain speed unscrew flow control lever
(A) , moving it
down to increase speed or up to decrease speed (B) .
The bi-directional flow control needle valve
(C) stops
the apron chain from traveling in reverse if the power
unit hydraulic function is switched to reverse while
under full load. See
Reversing the Apron Chain, pg.5-4
for further instructions.
A
B
C
Electric Flow Control Adjustment
The electric flow control option controls the
hydraulic flow to the apron chain gearbox. To
change the apron chain speed simply use the
dial on the flow controller
(A) , turn it to the right
to increase speed or to the left to decrease
speed
(B) .
The bi-directional flow control needle valve
(C)
has the same function as the manual flow
control option.
NOTICE: Nitro manure spreaders equipped
with scale options do not require the electronic
controller in the power unit cab. The electric
flow control harness is instead wired into the
scale monitor, which automatically controls the
hydraulic flow and apron chain speed.
B
A
C
Optional Flow Control Operation
Tractors without variable hydraulic controls may have a Nitro manure spreader with a manual flow control
or electric flow control. These options allow the operator to control the apron chain speed separate from the
tractor. The manual flow control can only be controlled from the spreader, while the electric flow control can be
controlled from the tractor cab if it’s electric flow controller is mounted in the cab.