TTC Lifting CL05, Инструкция по эксплуатации

Страница: 6 / 9

4.Operation
Warning
To avoid damage and/or personal injury:
1 .Do not exceed maximum load of the clamp.
2. Do not use the clamp to lift or transport people.
3. Do not use damaged clamp or clamp that is not working
properly.
4. Do not lift or transport loads over people and make sure
all personnel remain clear of supported plate.
5. Do not lift the plate that is not fully engaged with the
clamping jaws.
6. Do not leave load supported by the clamp unattended
unless specific precaution have been taken.
7. Do not lift loads that are not balanced, and the holding
action is not secure.
SAFETY WARNING
Never Exceed Maximum Capacity
Never Lift UNDER 20% Of The Rated
Capacity
Used on all hot rolled structural steel plates and
sections up to a surface hardness of 300 Brinell/32
Rockwell C
4.1 Attaching the plate
Turn the function lever clockwise to disengage the jaws.
Then put the plate to the end of the mouth of clamp. Move
the function lever counter- clockwise lo gripe and lock the
5