Beijing TT Aviation Technology Co., Ltd.
Add: No.1 TTA Building, Niantou Industrial Park ,Changping District,Beijing, China
www.ttaviation.com
16
3.2 Getting Started
1) Before every started, push the primer pump several times until overflow fuel flows out
from the yellow pipe.(Fig.1) Check the filter to avoid clogging. Check muffler bolt to
avoid loosening .(Fig.2)
2) Power on and switch the three-position switch to
“
idle
”
. Make sure the status lamp
on generator controller is
“
green
”
. If not, please see Trouble Shooting chapter.
3)
Use hand puller: Close the Choke Lever(Fig.3),
①
Pull hand puller.
②
When hear
firing noise, release the hand puller.(If engine is in warm-start condition, choking may
not be necessary)
4) Open the Choke (Fig.3). Push start buttom for 2~3 seconds. Pull the starter until
hearing firing noise(Fig.4)
5) If can not get started, please refer to Trouble Shooting chapter.
