Copyright © 2017 TTA All Rights Reserved.
M8A pro Use Introduction
26
openedto prompt the real-time information, such as voltage, GPS, operation etc...
It is
suggested to open “
coordinates
” function if position deviation is obvious.
5.3 Route Establish
Four Automatic Operation modes: Map Point, Dot Equipment, Drone Point, Phone
Dot.
Map Point mode: Dot on a built-in map to plan route.
Dot Equipment: Use a Dot Equipment to make boundary points.
Drone Point: Drive drone to mark boundary points.
Phone Dot: Use Phone to mark boundary points.
5.3.1 Start Route Establish
1. Click
to enter into route interface.
2. Click
new
to name the block and then select point making type.
