1
1
Tsubaki
FLATVEYOR ZP Type
1 Construction
・
Part name
2
Precautions
Since welded ends tend to peel off in the tearing direction,
do not allow forces in the tearing direction to work on the
welded ends.
Please handle cables and tubes with care when wiring or
installing them in equipment.
ｓあきｓ
Be sure to fix the device in a bent position with the locking
part facing the outside.
Fixing one end (fixed or moving end) to the device while
the Flatveyor is straightened may cause the support
member to be fixed in the not bending direction.
Bending in this condition could damage the support
member.
※
Actual support member tube is black or white
Instruction Manual
Caution: Always wear the appropriate protective gear (safety glasses, gloves, safety shoes, etc.) when working.
Cap
（
Black only
）
Support member
Be careful not to allow
forces in tearing
direction.
Do not fix one
end of the
Flatveyor while it
is straightened.
When the support member is
fixed in a direction that is not
the bending direction, it will
break if bent in that condition.
Openable tube
(Two lineups of Black and White)
Outside
Locking part
Support member tube
(Two lineups of Black and White)
