Tsubaki
Cableveyor
®
1
Construction/
Nomenclature
2
Delivery
The Cableveyor is delivered in sections if its length exceeds the standard length (shown in number of links below).
The plastic travel and fixed end brackets, and the vertical/horizontal dividers, are normally shipped as unassembled parts.
z
TKP35H22 standard length (no. of links): 25 links
3
Connection
*The same guidelines apply to attaching links to the plastic travel/fixed end brackets.
Normally arms are delivered with one side opened (not locked into the link).
4
Disassembly
*The same guidelines apply to attaching links to the plastic travel/fixed end brackets.
Instruction Manual
Caution: Always wear the appropriate protective gear (safety glasses, gloves, safety shoes,
etc.) when working.
TKP35H22
(Formerly TKP0350)
Point of
separation
Moving end
bracket
Arm
Horizontal
divider
Fixed end
bracket
Vertical
divider
Link
3. Open the arms from
each link on either side
of the section to be
disassembled.
2. Insert
a
flat-head
screwdriver into the gap
between links and twist
in the direction of the
arrow to remove the pin
from the hole.
1. Support the other pins
and
bend
the
Cableveyor as shown to
separate the ends.
3. Align the ends.
2. Overlap the links, and
insert the pins into the
hole on one side.
1. Push in the other side,
insert the pin, and
connect.
