User Manual MC4.0
TSR Messtechnik AG
Ebnatstr. 164, CH-8207 Schaffhausen
Tel. +41 41 510 23 05, Fax +41 41 510 23 08
http://www.tsr-ag.ch
email: [email protected]
By using this TSR meter you can enjoy high precision and quality. You benefit from
many years of measurement experience, the intensive cooperation with
domestic and foreign universities, universities of applied sciences and research
institutes. The MC4.0 is manufactured in our factory with the utmost care. All
sensors are calibrated in our accredited wind tunnel systems and checked
precisely for the prescribed tolerance values.
A. Description
Safety and foreseeable misuse
-
Use MC4.0 only according to the instructions in this manual.
Another use may result in property damage or personal injury.
-
Always use MC4.0 outside areas of highly flammable and/or
explosive substances. Use in hazardous areas is not permitted!
-
Avoid moisture, extreme temperatures, vibrations and vibrations, as well as
strong sources of electromagnetic interference. These can significantly affect
the quality of the measurements or damage the device.
-
Unauthorized changes to the device can lead to malfunctions and are
prohibited for safety reasons.
-
After the service life has expired, send the device back to TSR Messtechnik. We
take care of the professional disposal.
B. How it works
Purpose
Applications and tasks:
-
Measuring and regulating air technology systems
-
Room climate measurement
-
Measurement of air flow under field conditions
-
Saving and printing measurement results
Measures:
-
Flow
-
Volume flow
-
Temperature
-
Relative humidity
Delivery scope
MiniAir20 and MC4.0 were inspected at the factory prior to delivery and left our
house in perfect condition. Please check the product for damage upon receipt
of the goods. If the transport damage is detected, please contact us
immediately.
Typical scope of delivery is:
-
MC4.0 Multi-channel meter
-
Sensor MiniAir20 (if ordered)
-
Charger/power supply USB 5 Watts
-
User manual (complete manual
online
on tsr-ag.ch)
-
Equipment accessories
Power supply
The power supply is provided via a fixed battery in the device. The USB-C charger
is included.
Display and control elements
Connections and interfaces
1. Lemo
plug for sensors
Connect the sensor for flow with the five-pole socket. Matching sensor types are
listed in chapter "Supported Sensor Types".
2. USB-C connection for sensor (front side)
Connect digital sensors to the mc 4.0 device (coming soon)
3. USB-C connection for power supply
To charge the battery or mains operation of the device.
Commissioning
Charging the battery
Use only the supplied power supply and charging cable to charge the
battery. Non-compatible power supplies can damage the device!
For initial commissioning, connect the power supply to MC4.0 and charge the
battery for approx. 2
hours. The device is then ready for operation and can be
used. The battery is fixed in the MC4.0 and designed for a long service life.
Please do not do any unauthorized work on the battery or the device. This
can cause irreparable damage to the device!
C. Operation
Key functions
To Switch on: press the button long.
To turn off: Press the key for a few seconds
Instrument displays Switch off
mode. Confirm to Switch off instrument with yes.
Back (Esc): After turning on the device the button has a back function and
cancel or exit selected settings and menu items.
The Ok key confirm inputs and activate menus or menu items (Enter
function).
Navigate between individual menu items with UP, DOWN, LEFT, RIGHT
You can also change parametric values.
Connecting sensors
MC4.0 offers sensor sockets for flow measurement as well as for humidity and
temperature measurement. The MiniAir20 and MiniWater20 series range sensors
are supported for flow measurement in air and water. These are complemented
by a combined humidity and temperature sensor.
-
Connect the sensor connector to the socket in the device.
-
The sensors should only be plugged in and out when the MC4.0 is switched off.
The MiniAir/Water20 sensors are detected automatically, the sensor type is
displayed in the Start menu.
Supported sensor types
Sensor type and measuring range
Short display in the Start menu
MiniAir20 Micro Air 0-20m/s
Micro 20m/s Air
MiniAir20 Micro Air 0-40m/s
Micro 40m/s Air
MiniWater20 Micro Water 0-5m/s
Micro 5m/s Water
MiniWater20 Micro Water 0-10m/s
Micro 10m/s water
MiniAir20 Mini Air 0-20m/s
Mini 20m/s air
MiniAir20 Mini Air 0-40m/s
Mini 40m/s Air
MiniWater20 Mini Water 0-5m/s
Mini 5m/s water
MiniWater20 Mini Water 0-10m/s
Mini 10m/s water
MiniAir20 Macro Air 0-20m/s
Macro 20m/s air
MiniAir20 Macro Air 0-40m/s
Macro 40m/s air
MiniAir20 Micro Air 0-20m/s Steel 140°C
Micro 20m/s Air 140°C
MiniAir20 Micro Air 0-40m/s Steel 140°C
Micro 40m/s Air 140°C
MiniAir20 Mini Air 0-20m/s Steel 140°C
Mini 20m/s air 140°C
MiniAir20 Mini Air 0-40m/s Steel 140°C
Mini 40m/s air 140°C
MiniAir20 Macro Air 0-20m/s Steel 140°C
Macro 20m/s air 140°C
MiniAir20 Macro Air 0-40m/s Steel 140°C
Macro 40m/s air 140°C
MiniAir20 Micro Air 0-20m/s Steel 250°C
Micro 20m/s Air 250°C
MiniAir20 Micro Air 0-40m/s Steel 250°C
Micro 40m/s Air 250°C
MiniAir20 Mini Air 0-20m/s Steel 250°C
Mini 20m/s air 250°C
MiniAir20 Mini Air 0-40m/s Steel 250°C
Mini 40m/s air 250°C
Humidity/temperature sensor
---
Info and status bar
The information bar is located at the top of the display and is permanently
displayed when the device starts.
It displays:
Battery capacity - battery level numeric in percent
Date/time in all profiles/menus, Bluetooth/WiFI status
The status bar is located at the bottom of the display and appears when a
measurement profile or menu is activated. Advertisements:
-
Info Configuration settings in the dialog menu
-
Instantaneic value or interval measurement - active measurement profile
-
Log AKTIV or Log STOPP - Datalogger on/off
-
File icon and name when browsing and displaying saved measurement results
Display - Display of the
measuring channels (max.
four) or of menu functions
Enter/Main Menu
Back/Dialogue
On/Off
Status bar
Infobar
Protective cover with
rear magnetic holders
USB-C port for
charging
LEMO plug for
Sensor connection
Display
sensor type
USB-C port for sensors
