TSL PAM1 MK2, Руководство по эксплуатации

Страница: 11 / 62

P a g e | 11
PAM1 MK2 User Handbook Issue 1
2.1 Front Panel Controls and Displays
PAM1 MK2 menus and features are navigated via a shortcut button, multi-function encoder and a
bank of five hotkey pushbuttons. No monitoring function is ever more than two clicks away from
the front panel view.

The left hand LCD screen displays bargraphs 1-8 in Full-screen mode and bargraphs 1-16 when
Menu / Data or Video modes are activated.

The left hand LCD also displays decoded Dolby bargraphs, Downmix components and Assign
Matrix selections

The right hand LCD screen displays bargraphs 9-16 in Full-screen mode and Menu / Data or
Video screens when activated.

The left hand rotary encoder is used to activate the
‘Scroll To Hear’
feature and to make
selections within Menus and Presets .

The volume knob is used to adjust internal/external loudspeaker and headphone levels. The
control also features a ‘push’ action which
Cut/Dim loudspeaker audio.

The ‘
Shortcut
’ button is the key to simple operation of
PAM1 MK2 . Press Shortcut to access a
unique menu page which includes the most commonly used menu commands and features.

The USB port is used to save and load User Presets to a compatible memory storage device

The 5 Hotkey buttons work like the presets on a car stereo. Push and hold a Hotkey to instantly
save a favourite monitoring mode

The Factory Default condition ships the following Presets pre-programmed on Hotkey buttons 1-
5 respectively. These may be overwritten at any time: defaults can be restored via the reset
procedure described in Section
2.20 of this handbook.
1. SDI 1 Input Pair 1
2. SDI 2 Input Pair 1
3. AES Input Pair 1
4. Analogue Input Pair 1
5. Unassigned
2.2 Rear Panel Connectivity
Unique to the PAM1 MK2, the rear panel features an External Monitor HD-SDI output BNC which
can be connected to a compatible external display device directly via SDI or by use of a 3
rd
party
convertor to HDMI or DVI equipped monitors.
The Ethernet port fitted to the rear of the unit is not active in the initial product release however it
will be activated by a forthcoming software release and application software will follow in due
course.