Page
9
of
41
Using the PAM1-IP-3G and PAM2-IP-3G with ST-2110
The following steps are only applicable when monitoring ST-2110 Multicast Sources. To configure the
PAM1-IP-3G and/or PAM2-IP-3G for use with ST-2022-6 Multicast Sources, please go directly to Page
13
.
Several configuration steps are required to prepare the PAM1-IP-3G and/or PAM2-IP-3G for use in a
network to monitor 2110 signals.
To configure your PAM1-IP-3G and/or PAM2-IP-3G to monitor ST-2110 Sources, the following three
settings should be made first using the Setup Menu.
•
Module Setup
(allows the setting or changing of the IP address for each SFP Module) see page
10
•
Global Options
Setup (allows the setting or changing of the expected video format, sender type,
video timing and multicast filtering method for each SFP Module) see page
11
•
PTP Setup and Status
(allows the setting or changing of the PTP Domain for each SFP Module) see
page
12
Содержание PAM1-IP-3G
Страница 34: ...Page 34 of 41 PAGE INTENTIONALLY LEFT BLANK...
