background image

 

Limitation of Warranty and Liability 

Seller warrants the goods sold hereunder, under normal 
use and service as described in the operator's manual, shall 
be free from defects in workmanship and material for 
twenty-four (24) months, or the length of time specified in 
the operator's manual, from the date of shipment to the 
customer. This warranty period is inclusive of any 
statutory warranty.  This limited warranty is subject to the 
following exclusions: 

a.  Hot-wire or hot-film sensors used with research 

anemometers, and certain other components when 
indicated in specifications, are warranted for 90 days 
from the date of shipment. 

b.  Parts repaired or replaced as a result of repair services 

are warranted to be free from defects in workmanship 
and material, under normal use, for 90 days from the 
date of shipment. 

c.  Seller does not provide any warranty on finished 

goods manufactured by others or on any fuses, 
batteries or other consumable materials. Only the 
original manufacturer's warranty applies. 

d.  Unless specifically authorized in a separate writing by 

Seller, Seller makes no warranty with respect to, and 
shall have no liability in connection with, goods which 
are incorporated into other products or equipment, or 
which are modified by any person other than Seller.  

The foregoing is IN LIEU OF all other warranties and is 
subject to the LIMITATIONS stated herein. 

NO OTHER 

EXPRESS OR IMPLIED WARRANTY OF FITNESS 
FOR PARTICULAR PURPOSE OR 
MERCHANTABILITY IS MADE

TO THE EXTENT PERMITTED BY LAW, THE 
EXCLUSIVE REMEDY OF THE USER OR BUYER, 
AND THE LIMIT OF SELLER'S LIABILITY FOR ANY 
AND ALL LOSSES, INJURIES, OR DAMAGES 
CONCERNING THE GOODS (INCLUDING CLAIMS 
BASED ON CONTRACT, NEGLIGENCE, TORT, 
STRICT LIABILITY OR OTHERWISE) SHALL BE 
THE RETURN OF GOODS TO SELLER AND THE 
REFUND OF THE PURCHASE PRICE, OR, AT THE 
OPTION OF SELLER, THE REPAIR OR 
REPLACEMENT OF THE GOODS. IN NO EVENT 
SHALL SELLER BE LIABLE FOR ANY SPECIAL, 
CONSEQUENTIAL OR INCIDENTAL DAMAGES. 
SELLER SHALL NOT BE RESPONSIBLE FOR 
INSTALLATION, DISMANTLING OR 
REINSTALLATION COSTS OR CHARGES. No Action, 
regardless of form, may be brought against Seller more 
than 12 months after a cause of action has accrued.  The 
goods returned under warranty to Seller's factory shall be 
at Buyer's risk of loss, and will be returned, if at all, at 
Seller's risk of loss. 

Buyer and all users are deemed to have accepted this 
LIMITATION OF WARRANTY AND LIABILITY, 
which contains the complete and exclusive limited 
warranty of Seller. This LIMITATION OF WARRANTY 
AND LIABILITY may not be amended, modified or its 
terms waived, except by writing signed by an Officer of 
Seller. 

 

Service Policy 

Knowing that inoperative or defective instruments are as 
detrimental to TSI as they are to our customers, our service 
policy is designed to give prompt attention to any 
problems. If any malfunction is discovered, please contact 
your nearest sales office or representative, or call 
Customer Service at (800) 424-7427 (USA) and (1) 651-
490-2811 (International). 

Содержание ALNOR MicroManometer AXD 550



























Отзывы: