TSI Instruments 9510, Инструкции по эксплуатации

Страница: 20 / 89

2-2 A
ERO
T
RAK
™ Portable Airborne Particle Counter
I n s t r u m e n t D e s c r i p t i o n
The A
ERO
T
RAK
™
Portable Airborne Particle Counter has many
features to make measurements convenient. The power switch is
located on the front panel in the lower-left. A power LED indicates
when the instrument is powered up. The main interface for the
user is the color touch-screen interface on the front (see the note
below on using a stylus with the screen). The sample inlet is
located on the top of the instrument. A barbed inlet is normally
installed, but an isokinetic inlet is also available. A large handle is
also located on top to carry the instrument. On the left side of the
instrument is a built-in printer.
The back of the instrument has many features that are described
in the table below.
Description Function
Battery access This plate provides access to a battery bay. The instrument can be
run on up to two rechargeable batteries to allow portable operation
for up to two to seven hours (model dependant) or with a single
battery to allow switching outlets between rooms without powering
the unit down.
Pump exhaust
diffuser Provides an outlet for the filtered exhaust
DC Power
connection This power connection is for use with an external supply. Only
the TSI-supplied 24 VDC 3.0 A power supply model 6001584
should be used.
Power
Switch
Touch
Screen
Printer
Sample
Inlet
Isokinetic
Probe