Operation
7
DATA LOGGING
Measurements
Measurements to be logged are independent of measurements on the
display, and must therefore be selected under DATA LOGGING
Æ
Measurements.
Log Mode/Log Settings
You can set Log Mode to Manual, Auto-save.
•
Manual mode does not automatically save data, but instead prompts
the user to save a sample.
•
In Auto-save mode, the user manually takes samples that are
automatically logged.
Delete Data
Use this to delete all data, delete test or delete sample.
% Memory
This option displays the memory available. Delete All, under Delete
Data, will clear memory and reset the memory available.
LogDat2
™
Downloading Software
The Model 9545/9545-A comes with special software called LogDat2
Downloading Software, which is designed to provide you with maximum
flexibility and power. To install this software on your computer, follow the
instructions on the label of the LogDat2 CD-ROM.
To download data from the Model 9545/9545-A, connect the supplied
computer interface USB cable to the Model 9545/9545-A and to a computer
USB port. Then run the LogDat2 software. Within the LogDat2 software,
either select the tests to be downloaded or double-click on a test to open it.
