TSE PTV100/72, Руководство пользователя

Страница: 68 / 480

Safety
DX,WW,HPCR1 -19-07JAN03-1/1
DX,FLUID -19-12OCT11-1/1
DX,TORCH -19-10DEC04-1/1
Do Not Open High-Pressure Fuel System
High-pressure fluid remaining in fuel lines can cause
serious injury. Do not disconnect or attempt repair of fuel
lines, sensors, or any other components between the
high-pressure fuel pump and nozzles on engines with
High Pressure Common Rail (HPCR) fuel system.
Only technicians familiar with this type of system can
perform repairs. (See your John Deere dealer.)
TS1343
—UN—18MAR92
Avoid High-Pressure Fluids
Inspect hydraulic hoses periodically – at least once
per year – for leakage, kinking, cuts, cracks, abrasion,
blisters, corrosion, exposed wire braid or any other signs
of wear or damage.
Replace worn or damaged hose assemblies immediately
with John Deere approved replacement parts.
Escaping fluid under pressure can penetrate the skin
causing serious injury.
Avoid the hazard by relieving pressure before
disconnecting hydraulic or other lines. Tighten all
connections before applying pressure.
Search for leaks with a piece of cardboard. Protect hands
and body from high-pressure fluids.
If an accident occurs, see a doctor immediately. Any fluid
injected into the skin must be surgically removed within
a few hours or gangrene may result. Doctors unfamiliar
X981
1
—UN—23AUG88
with this type of injury should reference a knowledgeable
medical source. Such information is available in
English from Deere & Company Medical Department in
Moline, Illinois, U.S.A., by calling 1-800-822-8262 or +1
309-748-5636.
Avoid Heating Near Pressurized Fluid Lines
Flammable spray can be generated by heating near
pressurized fluid lines, resulting in severe burns to yourself
and bystanders. Do not heat by welding, soldering,
or using a torch near pressurized fluid lines or other
flammable materials. Pressurized lines can accidentally
burst when heat goes beyond the immediate flame area.
TS953
—UN—15MA
Y90
05-9 032015
PN=26