TSC TTP-268M, Руководство по обслуживанию

Страница: 41 / 49

39 39
TTP-268M/ TTP-366M
Bar Code Printer Service Manua
l
Adjust the print head pressure adjustment knob
The print head pressure adjustment knob has 5
levels of settings. Clockwise direction adjustment
is to increase the print head pressure. Counter
Clockwise adjustment can decrease the print head
pressure.
If the wrinkle on the label starts from the lower left
side to upper right side, please do following
adjustment.
1. Decrease the right side print head pressure
adjustment knob setting 1 level per each
adjustment then print the label again to check if
wrinkle is gone.
2. If the right side print head adjustment knob
setting has been set to index 1 (the lowest
pressure index), please increase the left side
print head pressure.
3. If the left side print head adjustment knob
setting has been set to 5 (the highest pressure
index) the
wrinkle can’t be avoided, please
increase the middle print head pressure knob.
4. If the
wrinkle can’t be avoided, please refer to
next chapter to adjust the Z-axis mechanism
adjustment knob.
Pressure knob
adjustment reference:

6
” label
Left index Middle index Right index
2 1 1
3 1 1
4 1 1
5 1 1
5 2 1
5 3 1
5 4 1
5 5 1

3
” label
Left index Middle index Right index
2 2 1
3 3 1
4 4 1
5 5 1
Adjust the print head pressure adjustment knob
The print head pressure adjustment knob has 5
levels of settings. Clockwise direction adjustment is
to increase the print head pressure. Counter
Clockwise adjustment can decrease the print head
pressure.
If the wrinkle on the label starts from the lower right
side to upper left side, please do following
adjustment.
1. Decrease the left side print head pressure
adjustment knob setting 1 level per each
adjustment then print the label again to check if
wrinkle is gone.
2. If the left side print head adjustment knob level
has been set to index 1 (the lowest index), please
increase the right side print head pressure.
3. If the right side print head adjustment knob setting
has been set to 5 (the highest pressure index) the
wrinkle can’t be avoid, please increase the middle
print head pressure knob.
4. If the
wrinkle can’t be avoided, please refer to
next chapter to adjust the Z-axis mechanism
adjustment knob.
Pressure knob
adjustment reference:

6
” label
Left index Middle index Right index
1 1 2
1 1 3
1 1 4
1 1 5
1 2 5
1 3 5
1 4 5
1 5 5

3
” label
Left index Middle index Right index
1 2 2
1 3 3
1 4 4
1 5 5
Left knob Right knob Middle knob Middle knob