Page of 2
1
Quick Installation Guide
Printer Overview
Note: The interface picture here is for reference only. Please refer to the specification for the interfaces
availability.
Setting up the Printer
1. Connect the printer to the computer with the provided printer cable.
2. Plug one end of the power cord into the power connector at the rear of the printer, and then plug the other
end into a properly grounded wall outlet.
Note: Please switch OFF printer power switch prior to plug in to the power cord to printer power jack.
Loading the Ribbon
(1) Open the printer cover and front
panel.
(2) Place an empty paper core onto
the ribbon rewind spindle.
(3) Insert the left side first. Mount
the ribbon rewind paper core on
the front hubs. Please be noted
that the bigger hub side with 4
ribs must be installed toward the
right side of ribbon mechanism.
(4) Insert the left side first. Install a
ribbon on the ribbon supply
spindle. Mount the
ribbon
supply
spindle on the rear hubs.
(5) Please be noted that the bigger
hub side with 4 ribs must be
installed toward the right side of
ribbon mechanism.
(6) Disengage the printer carriage
by pulling the print head release
lever.
(7) Following the direction of the
RIBBON
label, pull the
transparent ribbon leader to the
front from under the ribbon
mechanism.
(8) Attach the ribbon leader to the
empty paper core on the ribbon
rewind spindle (with a tape).
(9) Rotate the ribbon rewind spindle
until the ribbon overlaps the
ribbon leader and stretches
tight.
Print Head
Adjustable
Label Guide
Media Sensor
Platen Roller
Sensor Switch
Label Roll
Guard
Label Supply
Spindle
Ribbon Supply
Spindle
Ribbon Rewind
Spindle
Print Head
Release Lever
Printer Cover
Front Panel
Label Dispense
Opening
Liner
Opening
Graphic LCD with Backlit
Display (Option)
Power Jack
Socket
RS-232C
Interface
Centronics
Interface
(Option)
USB Interface
Power Switch
SD Card Socket
Ethernet
Interface
(Option)
Label Insert Opening
(For use with external
labels)
