Quick Installation Guide
Printer Overview
Note:
The interface picture here is for reference only. Please refer to the product specification for the interfaces
availability.
Loading the Ribbon
(1) Open the printer top cover by
pressing the top cover open tabs
located on each side of the printer.
(2) Insert the paper core to the ribbon
rewind spindle.
(3) Insert the left side of ribbon rewind
spindle to the ribbon rewind hub first
then insert the right side of ribbon
rewind spindle to the hole at the
right side of ribbon mechanism.
(4) Push the print head release button
to open the print head mechanism.
(5) Insert the ribbon to the ribbon
spindle.
(6) Insert the left side of ribbon supply
spindle to the ribbon supply hub first
then insert the right side of ribbon
supply spindle to the hole at the right
side of ribbon mechanism.
(7) Pull the ribbon through the print
head and then stick the ribbon onto
the ribbon rewind paper core. Keep
the ribbon flat and without wrinkles.
(8) Turn the ribbon rewind hub until the
ribbon plastic leader is thoroughly
wound and the black section of the
ribbon covers the print head.
(9) Close the print head mechanism by
both hands and make sure the
latches are engaged securely.
Page 1 of 2
Rear external label
entrance chute
Power jack
socket
RS-232C interface
(Option)
Centronics
interface
(Option)
USB interface
LED indicator
Ethernet
Interface
(Option)
Power switch
Feed button
Top cover
open tab
Ribbon rewind
spindle
Printer top cover
LCD display
(Option)
Media supply
spindle
Fixing tab
Ribbon rewind
hub
Print head
release button
Paper roll
mount
microSD card
socket
Platen roller
Gap sensor
Media guide
Black mark sensor
Media bar
Print head
Ribbon supply
spindle
Ribbon supply
hub
