8
Starscope on equatorial mount
Instruction manual
When mounting the tripod
legs, make sure that the
three retaining plates for the
storage plate face inwards.
Then attach the tripod legs
to the mount head using the
three screws ‚M‘. You should
not tighten these screws too
much yet.
First screw the three screws ‚O‘ into the
threads of the tripod legs, but do not tighten
the screws too much, only „hand-tight“. You
can later use these three screws to change
the „working height“ of the tripod or to adjust
the tripod to an uneven floor.
Assembling the Tripod
Now fasten the storage
plate to the retaining plates
of the ripod legs using the
three screws (N). To do this,
insert the screws with a
washer from above into the
holes provided for this pur-
pose in the storage plate ...