Tryton TUV12B, Руководство по эксплуатации

Страница: 7 / 52

2. quantity of soap and then wiped dry. Do not use any detergents or
solvents as they can damage parts made from plastics.
3.
TRANSPORTATION:
4.
Sp. z o.o.
n
NOTE:
STORAGE AND MAINTENANCE:
The tool in principle does not require any special maintenance or service.
The tool must be stored in a place that is not accessible to children and
must be kept clean and protected from moisture and dust. The storage
conditions should prevent potential mechanical damage and impact of
the weather conditions.
small
To drill large diameter boreholes it is recommended to start with
drilling a low-diameter borehole and then expand it to the desired
diameter. It prevents the tool from overloads.
When the drilling bit is seized during working switch immediately
tool off to prevent it from being damaged. Switch the rotations
direction to the anticlockwise rotations and then remove the drilling
bit from the borehole.
Keep the drill aligned with the axis of the borehole. The drilling bit
must be positioned perpendicularly to the surface of the machined
material. When the perpendicularity fails to be maintained the
drilling bit may be seized or broken or, under extreme circumstances,
the operator may be injured.
PROTECTION OF THE ENVIRONMENT:
The symbol nearby denotes that old equipment must
never be thrown away together with other waste (with the
penalty of a fine).
Hazardous components of electronic
equipment may adversely affect the natural environment and
human health.
Each household may contribute to the recovery and reuse (recycling) of
old machinery and equipment. Both in Poland and Europe a system for
recovery of used equipment either exists or is being created. The system
obliges all organizations that sell such equipment to collect the used
machinery and appliances. Moreover, general purpose collecting points
for suh equipment are available.
After cleaning let
the tool dry completely before it is used again.
Store and transport the tool in its transport box to protect it against
humidity, dust penetration and small objects; remember to protect its
ventilation openings. Small objects after getting into the casing can
result in damage to the motor.
MANUFACTURER:
PROFIX ; ul. Marywilska 34 , 03-228 Wars z aw a , POLAND.
This appliance is in conformity with national and European standards as
Rotation speed of the drill spindle is controlled by the force the power
well as with general safety guidelines.
switch is depressed with.
Any repairs are allowed to be carried out exclusively by qualified staff
Driving screws with use of original spare parts.
It is recommended to drill the pilot borehole first. The pilot borehole must
be a little deeper and with a less diameter than the outer diameter of the
screw thread. When the screw is to be driven within the vicinity of the
material edge the pilot borehole prevents from undesired chipping of the
material.
If the screw is driven with abnormal difficulty the screw must be
retracted and the pilot borehole diameter should be enlarged.
Anyway, when problem to drive the screw in persists (e.g. in case of hard
wood grades) try to use a lubricating agent (e.g. liquid soap). Press the
tool to the screw with sufficient force to avoid spontaneous rotation of
the driving bit in the screw head. Use only those bits that accurately
match the bit head. When the screw head is damaged further driving the
screw in or out may prove infeasible.
PICTOGRAMS:
Explanation of the icons located on the nominal plate and the
information tags
:
Clean the tool pursuant to maintenance schedule. Remember to always
disconnect the battery from the tool prior to starting the cleaning
operations and
unplug the charger from the outlet.
The charger may be cleaned exclusively with use of a dry cloth. Use also a
clean cloth to clean regularly the ventilation openings of the tool to keep
them patent. From time to time disassemble the grip and remove dust
and other rubbish from the interior.
The tool housing must be cleaned with use of a moistened cloth
7
« » Always wear appropriate eye protection
« » Use appropriate hearing protection
«Read this instruction before switching on the
power supply and starting the work»
TROUBLESHOOTING GUIDE:
PROBLEM POSSIBLE CAUSE REMEDY
Irregularities of the motor
operation.
Worn carbon brushes of the motor. Have the brushes replaced at a service workshop.
The tool (drill/screwdriver)
fails to operate.
No power voltage, damaged
motor or the power trigger.
Check the battery status, recharge or replace with a new one when necessary.
When the problem persists hand over the tool for repair at a service workshop.
Please refer to the warranty sheet for addresses of authorized workshops.
Battery low. Recharge the battery.
The policy of the PROFIX company consists in permanent improvements of the offered products and therefore the company
reserves the right to make amendments to the product specification without a prior notice. The images included into the
operation manual are only of the exemplary nature and may slightly differ from actual appearance of the device purchased.
This instruction manual is protected by copyright. Copying it without the written consent of PROFIX Co. Ltd. is prohibited.